This is not as explained in the manual.
You can visit and read the link below but its explanation might not be clear. If the assembly is stiff to come off you may doubt your advice.
So, read the link first http://wiki.answers.com/Q/How_do_you_change_the_rear_indicator_bulb_on_a_Peugeot_308_SW
and then read this.
You DON'T TWIST THE ASSEMBLY. Pull it out straight from the rear of the car. Wiggle it about and pull it backwards in the direction of the screws that were extracted.
You can use a screwdriver, though I didn't.
Pull from the large black area of the assembly. Don't fiddle with the red portion that is shown in this photograph.
This photo shows how the thin part of the assembly it secured to the car. It is not in tight. It comes out very easily when you pull the assemble away from the car.
Tuesday, October 25, 2011
Carbon frame repair - UK
When the Carbon frame gives up or suffers it's time to despair. But help is at hand.
By all accounts the repair can be stronger than the original frame. Maybe a gram or so heavier. And they can do great work with the decals.
There are some images on the web from USA sites that show an excellent quality finish.
http://www.carboncyclerepairs.co.uk/index.html
Tuesday, October 18, 2011
Review CC-UK 'Aerate' 'Noir' Long Sleeve Cycle Jersey (BLACK)
http://www.cycle-clothing.co.uk/Products/198/ccuk-aerate-noir-long-sleeve-cycle-jersey-black.aspx
Cheap at £19.84.
A loose fit.
Quite thin. So needs to be used as a layer in spring or autumn.
Quality is ok. Fit's the price.
The collar looks a bit ill-fitting or wrong or cheap somehow.
Description:
Subscribe to:
Posts (Atom)